marketing@pratishnaengineers.com 08069247353 Ext : 852
- Send SMS Send Email
Two Platen Injection Molding Machine
| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Automatic Grade | Fully Automatic |
| Power | 1-3kw, 6-9kw |
| Driven Type | Electric |
| Click to view more | |
Preferred Buyer From
| Location | Anywhere in India |
Product Details
Surface Finishing
Perfect
Warranty
5years
Condiiton
New
Volatage
110V, 220V
Description
- Balance Clamping force, it avoids corner flashes
- Moving platen on linear motion guide, it avoid guide pin wear
- Extra-long opening with
- Easy maintenance
- Very less requirement of oil handling compare to Ram/ Direct locking machine
- hence low power consumption
- Extra-long ejector & force
- Clamp force can be increase on demand
- Opening stroke can be increase on demand
- Low floor space requirement
- Supports 160T-350T
Technical Specification
INJECTION UNIT
| Screw Diameter | mm | 27 | 35 |
| Screw L/D Ratio | 20 : 1 | 18 : 1 | |
| Max.Shot Wieght (PS) | gm's | 64 | 130 |
| Max.Injection Pressure | kg/cm² | 1300 | 1065 |
LOCKING UNIT
| Mould Clamping Force | Tons | 40 | 50 |
| Mould Clamping Stroke | mm | 200 | 240 |
| Mould Thickness - Min-Max. | mm | 150 | 300 |
| Max.Day Light Opening | mm | 350 | 540 |
| Space Between Tei Bars - H x V | mm | 360 X 310 | 190 X 180 |
| Platen Size - | mm | 250 X 200 | 300 X 300 |
HYDRAULIC EJECTOR
| Ejector Stroke | mm | 40 | 50 |
| Ejector Force | Tons | 1.7 | 2 |
GENERAL
| Electric Motor | HP | 5 | 7.5 |
| Heating Capacity | HP | 3.5 | 5 |
| Total Connected Load | HP | 8.5 | 12.5 |
| Tank Capacity | Ltrs | 100 | 150 |
| Machine Weight | Tons | 1 | 1.75 |
| Floor Space ( L x W ) | Mtr | 2.39 X 1.85 | 2.24 X 0.89 |
| Floor Space ( L x W ) | Feet | 7.84 X 6.1 | 7.35 X 2.92 |
Looking for "Two Platen Injection Molding Machine" ?
Explore More Products
